Council — Identify High-Low for Precision Grading
Describe the application, material route, growing or working area and proposed rental period. A listed scenario is not a claim that a Dugong rental unit or local service is available.
This reference assembles relevant extracts from the guide library. It is general project planning, not a local project report, verified specification or translated technical publication.
High-to-Low Redistribution
High-to-low redistribution can reduce local quantity imbalance when the high area's material suits the low area's intended use. It should follow measured levels, not visual guesses.
Before moving material
Mark confirmed cut and fill areas and soil layers.
Receiving operation and checks
Prepare the placed material and recheck the profile. Compare productive-layer depth in both source and receiving zones.
Some low areas are designed drains and should not be filled.
Read the complete High-to-Low Redistribution guidePrecision Grade Control
Precision grade control is the stage where a reference system is commissioned for the intended surface. It needs design transfer and equipment checks before productive grading.
Before moving material
Confirm design revision, datum and the working-edge reference.
Receiving operation and checks
Verify surface results independently during and after the work. Record calibration and any reference interruptions.
Machine guidance is not acceptance certification.
Read the complete Precision Grade Control guideHow to Move Soil From High Spots to Low Spots
Moving soil from high spots to low spots requires a measured surplus and a suitable receiving area. A low patch caused by weak support may need repair before fill.
Before moving material
Check source material and the low area's cause.
Receiving operation and checks
Prepare the receiving layer and restore the source surface. Check both final levels and soil-layer depth.
Avoid filling designed drains or mixing unsuitable subsoil into growing medium.
Read the complete How to Move Soil From High Spots to Low Spots guideRecord the job inputs
Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.
Checklist ticks apply only while this page is open. Include the completed brief in your project records.
Prepare a project enquiryContinue through the network
Surface and verification · Applications and rental · Equipment and technology
Return to this reference group