Farm Owner — Measure Area

Farm Road Grading

Farm-road grading should address the reason water and traffic damage the surface. Repeatedly dragging loose material over a pothole can leave its weak base unchanged.

Before moving material

Inspect crossfall, wheel tracks, drain outlets and underlying material.

Receiving operation and checks

Compact and check the surface before normal traffic resumes. Inspect culvert approaches and areas where runoff crosses the road.

Grading cannot compensate for inadequate drainage or unsuitable pavement material.

Turf Farm Levelling

Turf-farm levelling needs to support repeated mowing and harvesting while maintaining a usable growing layer. Local elevation and soil-depth checks are complementary.

Before moving material

Confirm the farm's growing-medium and irrigation requirements.

Receiving operation and checks

Finish the seedbed and establish the turf crop. Check level continuity and layer depth where material was moved.

No turf yield or harvest-quality guarantee follows from a grading image.

Design - Measure - Move - Verify

Design, measure, move and verify is a closed loop. The verification step tests whether the movement achieved the design rather than merely whether the operator followed a display.

Before moving material

Issue an agreed surface design and reliable control.

Receiving operation and checks

Correct residual defects and record acceptance before the next operation. Use independent observations for the final check.

Do not treat production guidance and acceptance evidence as the same record.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology