Shed Pad — Survey Overlay

Shed Pad Preparation

A shed pad must support its intended use and remain connected to access and drainage. Light storage, vehicle use and other activities can require different formation and material decisions.

Before moving material

Confirm shed layout, floor level, access loads and services.

Receiving operation and checks

Complete compaction and the shed builder's required checks. Inspect transitions at doorways and runoff routes beside the pad.

The machine selection does not establish structural suitability.

Building Pad Preparation

Building-pad preparation should follow the structural and civil brief. A scraper can help place and trim suitable material, but levels and fill condition must be accepted separately.

Before moving material

Confirm the approved pad level, footing zone and inspection requirements.

Receiving operation and checks

Hand over after specified testing and level checks. Compare pad levels with surrounding drainage and proposed floor levels.

A smooth pad is not evidence of engineered fill or a suitable foundation.

Surveying for Land Grading

Surveying for grading establishes the relationship between the site and the intended surface. Machine guidance can assist work, but the survey determines the reference against which results are checked.

Before moving material

Define the survey area, control and required deliverables.

Receiving operation and checks

Use the survey to prepare the design and later acceptance checks. Retain the datum, units and control-point descriptions.

A topographic survey and a legal boundary survey serve different purposes.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology