Livestock Yard — Lost Crossfall

Livestock & Feedlots

Livestock yards and feedlots require clear separation between animal surfaces, machinery routes and effluent management. Surface cleaning and structural reconstruction are different interventions.

Before moving material

Remove animals from the work zone and identify the approved waste handling route.

Receiving operation and checks

Restore the required surface and follow the site's cleaning and biosecurity procedure. Check drainage paths, fences and exposed services after work.

Do not move contaminated material between clean areas or imply that grading controls disease.

Incorrect Crossfall

Crossfall controls the change in level across a road, path or other surface. A correct centreline does not prove that the edges drain correctly.

Before moving material

Measure the cross-section at the affected location.

Receiving operation and checks

Check the corrected section and the neighbouring transition sections. Verify both edges and any gutter or drain connection.

Do not infer a road crossfall specification from a generic illustration.

Crossfall Control

Crossfall control sets the transverse profile separately from longitudinal grade. Roads and other surfaces can require a crown, one-way fall or transitions between profiles.

Before moving material

Identify the designed cross-section and its changes along the asset.

Receiving operation and checks

Verify adjoining sections so the profile changes smoothly. Check ties to drains, gutters and existing surfaces.

Machine tilt indication is not a substitute for final cross-section measurement.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology