Livestock Yard — High Spots

High Spots

A high spot is meaningful only relative to the intended surface. It may obstruct runoff, limit cultivation depth or sit above a construction formation. Cutting it without knowing the target can remove useful soil unnecessarily.

Before moving material

Measure the feature against surrounding levels and the agreed datum.

Receiving operation and checks

Recheck the corrected level and restore the appropriate surface layer. Check whether the high spot was a local deposit or part of the intended contour.

A visible mound is not automatically a defect.

How to Move Soil From High Spots to Low Spots

Moving soil from high spots to low spots requires a measured surplus and a suitable receiving area. A low patch caused by weak support may need repair before fill.

Before moving material

Check source material and the low area's cause.

Receiving operation and checks

Prepare the receiving layer and restore the source surface. Check both final levels and soil-layer depth.

Avoid filling designed drains or mixing unsuitable subsoil into growing medium.

Livestock & Feedlots

Livestock yards and feedlots require clear separation between animal surfaces, machinery routes and effluent management. Surface cleaning and structural reconstruction are different interventions.

Before moving material

Remove animals from the work zone and identify the approved waste handling route.

Receiving operation and checks

Restore the required surface and follow the site's cleaning and biosecurity procedure. Check drainage paths, fences and exposed services after work.

Do not move contaminated material between clean areas or imply that grading controls disease.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology