Council Works Team — Fine Grading

Councils & Public Works

Council and public works briefs should state the asset outcome, scope boundaries and evidence needed for acceptance. Naming a machine too early can obscure whether the work requires design, bulk excavation or surface correction.

Before moving material

Identify the asset owner, procurement brief and work-zone controls.

Receiving operation and checks

Record the verified result and any work outside the contractor's scope. Check that the completed work answers the brief rather than a machine-based promise.

No council endorsement, supplier approval or procurement status is implied.

Fine Grading

Fine grading removes smaller departures from the intended surface after the main quantities are close. Light controlled passes are more useful than repeatedly loading heavily through nearly finished ground.

Before moving material

Confirm that underlying formation and material are accepted.

Receiving operation and checks

Protect the corrected surface and schedule the next operation promptly. Inspect local depressions, edge ties and smooth changes in slope.

Fine grading is a geometric operation; it does not certify density or bearing capacity.

How the Dugong Works

The Dugong workflow separates material collection from its final placement. Once suitable material is loaded, it can be carried to the receiving area and then graded into the required surface.

Before moving material

Identify cut limits, usable material and the receiving level.

Receiving operation and checks

Check the surface and perform the required compaction or crop preparation. Compare source and receiving levels after movement.

Operating instructions for the supplied configuration take precedence over a general website explanation.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology