Remote Community Infrastructure Grading

Remote and Autonomous Development

Remote or autonomous operation is a development pathway requiring an assessed control and operating system. Removing the operator from the tractor does not remove the need to manage machine movement and site access.

Before moving material

Define the intended operating area and control responsibility.

Receiving operation and checks

Commission under an appropriate controlled method. Confirm how the system detects and responds to loss of usable control.

No autonomous Dugong product or safety approval is claimed here.

Orchard Development

An orchard layout needs usable inter-row tracks and a planting zone that remains suitable as the trees mature. Consider runoff crossings and turning spaces before planting fixes the layout.

Before moving material

Map proposed trees, service lines and access routes.

Receiving operation and checks

Complete irrigation installation and planting after the formation is checked. Inspect low inter-row sections and the connections to drainage outlets.

Avoid treating deep tree-root preparation as a shallow grading task.

Vineyard Development

Vineyard development places long-lived rows and posts on a surface used repeatedly by tractors and harvest equipment. The grading brief should include safe access and drainage through row ends rather than only a general field slope.

Before moving material

Set out rows and mark service locations.

Receiving operation and checks

Recheck the layout before installing posts and irrigation. Check turning areas and drainage continuity between blocks.

Established trellises can restrict scraper access and require a different maintenance method.

Record the job inputs

Use this checklist to turn the scenario into a specific brief. Retain the design revision and agree who accepts each completed layer.

• Existing condition, extent and the reason for intervention
• Required finished purpose, receiving operation and acceptance criteria
• Material type, layer role, source, receiving area and volume state
• Reference levels, datum, survey method and issued design revision
• Available tractor, implement configuration, travel route and turning space
• Checks before work, stopping points and evidence retained at handover

Checklist ticks apply only while this page is open. Include the completed brief in your project records.

Continue through the network

Surface and verification · Applications and rental · Equipment and technology